In manufacturing and daily life, we often see the joints between pipes and pipes, and there are also various ways of custom-made welded joints. Specifically discusses the interface methods and characteristics of metal hoses and steel pipes in manufacturing and life, analyzes the advantages and disadvantages of various interface methods, and specifically discusses the advantages and disadvantages of various interface methods, and specifically The structure of a kind of metal transition pipe joint is discussed.


According to the connection between various composite hard pipes and metal material composite hard pipes, the connection between various non-metallic material steel pipes and metal composite material hard pipes has a double-point connection in application. The required direction and clamping of the composite material tube can be moved relatively easily after connection.





In daily life and industrial manufacturing, the connection between metal hoses and various non-metallic steel pipes is very common: in oil and gas field manufacturing, the interface method is very complicated, and the connection between the coil fan and stove nozzle in the well room and the natural gas pipeline, The connection between the ignition pipe and the ventilation pipe of the water cooler furnace in the metering station; when the deep water injection well is inspected on site, the rubber hose for the deep water injection well is connected with the inlet and outlet pipelines of the steam flow meter of the deep water injection well; The steam turbine generator is connected to the steam turbine generator; the sorting equipment is added with water to connect the waste water pipes to each other; in daily life, of course, the liquefied gas tank, gas, liquid pipes and water heaters. The connection between the shower head and the cold water supply main pipe; the connection between the rubber hose of the garden water cooler and the tap water pipe (for manufacturing: the connection of the gas engine self-operated control valve pipeline). Due to the current interface method between metal hose and steel pipe in manufacturing and life, the custom-made transition pipe joint method is inconvenient in actual operation; it is not reliable after close connection, and the political concept of part of the connection steel pipe is not cost-effective, so we designed a plan. A type of metal hose and hose joints.


All transition connectors are available:
1. The serial number of the connection;
2. For the number of the angle-bend transition joint, add "4" to the back of the straight-through transition joint to indicate a 45° camber transition joint; "9" to indicate a 90° camber transition joint;
3. The number of the three-pass crossing connector;
4. The number of the four-way conversion connector.