1.The stainless steel joint rotary joint has been manufactured by precision molds. During the whole process of transportation and storage, collisions should be prevented to prevent damage to the socket and internal parts.

2. The installation of the stainless steel quick joint should be concentric with the connecting shaft to ensure the excellent operation of the rotary joint.

3. When installing the bolted rotary joint, pay attention to whether the external thread direction of the inner and outer pipes matches the rotation direction of the drum, and the external thread rotation direction of the inner and outer pipes should also be the same.




4. The connection between the rotary joint and the pipeline must be connected with a hose (our company strongly recommends the use of a metal hose with good disturbance), and rigid connection is strictly prohibited.

5. The inlet and outlet of the rotary joint should be connected with the hose as soon as possible. In order to relieve the auxiliary weight of the stainless steel joint and increase the service life.

6. For the installation of the inner pipe, pay attention to the mutual cooperation of the specifications and the auxiliary support point of the net weight. It is strongly recommended to use the tolerance fit of H8/e7 for the mutual fit between the inner tube of the rotary joint and the connector.

7. The support point and anti-rotation of the rotary joint should be appropriate. Generally, the diameter of the rod should be 3mm smaller than the anti-rotation hole, so as to prevent the random adjustment and compensation of the rotary joint of the stainless steel joint.