1. Keep the rotating stainless steel quick joint drum and the inside of the pipeline clean. Special attention should be paid to new equipment, and a filter should be added when necessary to prevent abnormal wear of the torsion joint caused by foreign objects.

2. If the machine is not used for a long time, it will cause scaling and rusting inside the torsion joint. Please pay attention to the occurrence of stuck or dripping when it is used again.

3. For those with oil injection installation, please inject oil on time to ensure the reliability of the torsion joint bearing operation.







4. The torsion joint of the smooth thermal medium should gradually generate temperature to prevent the temperature from changing drastically.

5. Inspect the wear and thickness of the sealing surface (normal wear is 5-10mm); check the friction track of the sealing surface to see if there are three-point discontinuities or scratches, if there is any of the above , should be replaced immediately.

6. The torsion joint should be handled with care and subjected to shock to avoid damage to the joint components.

7. It is strictly forbidden for foreign objects to enter the inside of the torsion joint.

8. Do not idling for a long time to twist the joint.